Bertazzoni QB30400X Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro ne Bertazzoni QB30400X. Bertazzoni QB30400X DL d61b6839d261b831001d8f50aa80 Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 23
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Installation, Service and User Instructions
(French version page 9)
DIMENSIONS: 29 7/16’’ (748 mm)(W) x 211/4’’ (540 mm)(D)
Models B7G0..Q7X (2 or 5)D
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OBSERVE ALL GOVERNING CODES AND ORDINANCES.
WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquid in the vicinity of
this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
- Do not try to light any appliance.
- Do not touch any electrical switch.
- Do not use any phone in your building.
- Immediately call your gas supplier from a neighbor’s phone. Follow
the gas supplier’s instructions.
- If you cannot reach your gas suppliers, call the fire department.
Installation and service must be performed by a qualified installer, service agency
or the gas supplier.
Read this instruction booklet before installing and using the appliance.
The manufacturer will not be responsible for any damage to property or to persons caused by
incorrect installation or improper use of the appliance.
The manufacturer reserves the right to make changes to its products when considered necessary and useful,
without affecting the essential safety and operating characteristics.
This appliance has been designed for non-professional, domestic use only.
Cod. 310671
Built-in gas hotplates
Zobrazit stránku 0
1 2 3 4 5 6 ... 22 23

Shrnutí obsahu

Strany 1 - (French version page 9)

Installation, Service and User Instructions (French version page 9)

Strany 2 - Installation instructions

10 INDEX: Instructions d’installation..…………………………………..………………………... page 10 Insertion de la table de cuisson..………………………………..………………….. . page 11 Exige

Strany 3 - Attaching the hotplate

11Le kit d’injecteurs pour le changement du type de gaz est contenu dans l’emballage avec le kit d’installation de la table et le livret d’instructio

Strany 4

12Fixation de la table de cuisson Pour empêcher aux liquides de fuir accidentellement dans l’espace de stockage sous-jacent, l’appareil est équipé d’

Strany 5

13Branchement électrique Le branchement de la table de cuisson au réseau est effectué par le fil électrique et la fiche tripolaire positionnée sous l

Strany 6 - Greasing the valves

14Réglage des brûleurs Réglage du "MINIMUM" sur les brûleurs Pour régler le minimum sur les brûleurs suivez le procédé indiqué ci-dessous:

Strany 7 - User instructions

15Instructions de service et d’entretien Le service et l’entretien doivent seulement être exécutés par une personne autorisée Pour remplacer les part

Strany 8

16Utilisation des brûleurs Un diagramme est gravé sur le tableau de commande sur chaque bouton qui indique quel brûleur correspond à ce bouton. Allum

Strany 9 - BERTAZZONI

17ventilateurs à tirage d’air/hottes d’aspiration. Une utilisation intensive et continue de l’appareil peut exiger une ventilation additionnelle, par

Strany 10

18 Fig 1 Fig 2 Fig.3 Fig.4 Fig.5 Fig.6

Strany 11 - Exigences

19 Fig.7 Fig.8 Fig.9 Fig.10 Inches mm A 1” 11/16 43 B 1” 3/16 30 C 1” 1/16 27 E 4”7

Strany 12

2 INDEX: Installation Instructions……………………………………..……………………….. pag.2 Inserting the hotplate……………………………………………..………………….. pag.3 Requirements…………………………

Strany 13

20 Fig.11 Fig.12 Fig.13 Fig.14 Fig.15

Strany 14 - Descriptions

SPAREPARTSLIST/LISTEDEPIECESDEDETACHEESQB30400XDROP‐INNUMBER COMPONENT DESCRIPTION COMPOSANT Q.TYREF.VUE REF.1 601693 WIRING CABLAGE 11 8

Strany 17 - BERTAZZONI SPA

3The minimum gas supply pressure for checking the regulator setting shall be at least 1“ w.c. (249 Pa) above the inlet specified manifold pressure to

Strany 18

4the hotplate into the bench top opening. With a screwdriver assemble the brackets A to the hotplate bottom by means of the screws B. (See Fig. 4). S

Strany 19

5Electrical connection The connection of the hobs to mains is effected via the flex and the three pin plug located underneath the hotplate. The appli

Strany 20 -

6Adaptation of the pressure regulator for use with different type of gas The pressure regulator supplied with the appliance is a convertible type pre

Strany 21

7User instructions WARNINGS: Keeping appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquid. Do n

Strany 22

8Correct usage of pans: - Dry the bottom of the pan before placing it on the hotplate. - Use pots with a flat, thick bottom, except for wok cooking.

Strany 23

9Installation, Service et Instructions pour l’Utilisateur

Komentáře k této Příručce

Žádné komentáře